
PLC and Control Systems
by Sunayana GadepatilSiemens and Rockwell programming, sequences, PID tuning, networks, alarms, commissioning and cybersecurity, from the plant floor
- 261 pages, A4 PDF
- 17 chapters + 7 appendices
- Siemens and Rockwell
- Excel tools workbook
- Instant download
About this book
Most engineers learn PLCs from a course and a manual, then discover on their first project that the hard part is not the instructions. It is deciding what a pump does when its interlock clears, why a loop oscillates, what happens when a remote station drops off the network at night, and how to hand over a system someone else can maintain for twenty years. This book covers those decisions, with Siemens TIA Portal and Rockwell Studio 5000 shown side by side in every chapter, code you can adapt, and examples with real numbers.
What is inside the book
261 pages, every chapter with a common mistakes table, a one-page summary and a quiz.
17 chapters
- How a PLC Really Works
- Hardware and Panel Design
- Digital and Analog I/O
- IEC 61131-3 Programming Basics
- Ladder Logic in Depth
- Function Block Diagram and Structured Text
- Sequence Control: SFC, GRAPH and ISA-88
- Reusable Motor, Valve and Analog Blocks
- PID Control in the PLC
- Alarms, Interlocks and Safety Basics
- Industrial Networks: PROFINET, EtherNet/IP and Modbus
- HMI and SCADA
- Process Dynamics and Loop Tuning
- Advanced Regulatory Control
- PLC, DCS and Redundancy
- Commissioning, FAT, SAT and Troubleshooting
- Good Practice and OT Cybersecurity
Appendices and extras
- 16 ladder and Structured Text exercises with solutions
- Siemens and Rockwell instruction comparison
- Modbus function codes, exception codes and checklist
- PID forms, units and tuning rules reference
- Templates: I/O list, FDS outline, test sheets, tuning record, change form
- 100 interview questions with answers
- Glossary of 82 terms
Excel workbook included
- I/O list builder with card count
- Analog scaling calculator with NE 43 check
- PID tuning calculator (lambda, SIMC, relay test)
- Modbus register map, float decoder and polling time

