
Hazardous Area Instrumentation
by Sunayana GadepatilZones, gas groups and temperature classes, Ex d, e, i and p protection, IS loop checks, cable glands and inspection, with Excel tools
- 180 pages, A4 PDF
- 14 chapters + 7 appendices
- Real photographs
- Excel tools workbook
- Instant download
About this book
Almost every instrument on a refinery, chemical plant, offshore platform or fuel terminal sits in a hazardous area, and each one is safe only if the right protection concept was chosen, installed correctly and kept that way. This book follows the order you meet it on a project: flammable gases, vapours and dusts, area classification, gas groups and temperature classes, protection concepts and Ex marking, flameproof, increased safety, intrinsic safety with full IS loop calculations, pressurisation, cables and glands, instrument selection, and inspection to IEC 60079-17, ending with an LPG loading area taken from classification to handover. Every calculation is shown with real numbers.
What is inside the book
180 pages, every chapter with a common mistakes table, a one-page summary and a quiz.
14 chapters
- Why Hazardous Areas Matter
- Flammable Gases, Vapours and Dusts
- Area Classification
- Gas Groups, Dust Groups and Temperature Classes
- Protection Concepts, EPLs and Ex Marking
- Flameproof Protection Ex d
- Increased Safety Ex e
- Intrinsic Safety Principles
- IS Loop Design and Entity Checks
- Pressurisation Ex p and Other Concepts
- Cables, Glands and Installation
- Selecting Instruments for Hazardous Areas
- Inspection and Maintenance
- Case Study: Instrumenting an LPG Loading Area
Appendices and extras
- 15 exercises with full solutions
- Gas property table
- Marking decoder and formula sheet
- Inspection checklists based on IEC 60079-17
- 100 interview questions with answers
- Glossary of 61 terms
- Real photographs with credits
Excel workbook included
- IS entity check with the 1 % rule and maximum cable length
- Loop voltage check for 2-wire transmitters
- Equipment selector and nameplate check
- Inspection checklist by protection concept
- FISCO segment check
- Purge time, dust surface temperature and % LEL calculators
- Gas property table

