What is RS485?
RS485 is a differential serial interface that lets many devices share one twisted pair over long distances.
RS485 Explained
Data travels as the voltage difference between two wires, A and B, which rejects common noise. Devices connect in a daisy chain bus, terminated at both ends.
It is the physical layer under Modbus RTU and PROFIBUS DP.
RS485: Typical Values
| Maximum length | about 1200 m at low baud rates |
| Unit loads | 32 standard unit loads per segment |
| Termination | about 120 Ω at each end |
Calculators for RS485
Free Downloads
Free Tools
Frequently Asked Questions
What is RS485?
RS485 is a differential serial interface that lets many devices share one twisted pair over long distances.
Why use a daisy chain, not a star?
Stubs and stars cause reflections that corrupt data at higher speeds.
What is biasing?
Resistors that hold the bus in a defined idle state when no device is talking.
Learn more on the blog
Modbus RTU troubleshooting: CRC, no response and fault table
A practical guide on instrumentationblog.in with more detail on RS485 and how it is applied on real plants.
Read Full ArticleRelated Terms
More Signals and PLC Terms
All signals and plc terms · Full glossary A to Z