Free engineering calculators and unit converters[email protected]
Flow Measurement · Glossary

What is an Orifice Plate?

DP flow elementFlow Measurement

An orifice plate is a thin plate with a precise bore clamped in a pipe; the DP across it is used to calculate flow.

Advertisement

Orifice Plate Explained

The orifice plate is the most widely used flow element. It is cheap, has no moving parts and is fully covered by ISO 5167-2, so it can be used without flow calibration.

Pressure is taken through flange, corner or D and D/2 taps. Accuracy depends on a sharp upstream edge, correct straight runs and clean impulse lines.

Orifice Plate Formula

qm = C ÷ √(1 − β⁴) × ε × π ÷ 4 × d² × √(2 Δp ρ₁)
qmmass flow (kg/s)
Cdischarge coefficient
εexpansibility factor
dbore (m)
Δpdifferential pressure (Pa)
ρ₁upstream density (kg/m³)
Note: ISO 5167-1 and 5167-2 general equation.
Advertisement

Calculators for Orifice Plate

Free Downloads

Frequently Asked Questions

What is an Orifice Plate?

An orifice plate is a thin plate with a precise bore clamped in a pipe; the DP across it is used to calculate flow.

Which way does an orifice plate face?

The sharp square edge faces upstream. The bevel, if any, is downstream. The tab is usually marked with the inlet side.

What is the difference between a flow orifice and a restriction orifice?

A flow orifice measures flow from DP. A restriction orifice only limits flow or drops pressure and is not used for measurement.

You May Also Like

Learn more on the blog

Mistakes in DP flow measurement

A practical guide on instrumentationblog.in with more detail on orifice plate and how it is applied on real plants.

Read Full Article

Related Terms

More Flow Measurement Terms

All flow measurement terms · Full glossary A to Z

Advertisement