RTD vs NTC Thermistor
Side by side comparison: how they work, where each fits, and which to choose.
Quick answer: Thermistors are cheap and very sensitive over a narrow range; RTDs are standardised, linear and stable over a wide range, so industry uses RTDs.
RTD vs NTC Thermistor: Comparison Table
| Aspect | RTD | NTC Thermistor |
|---|---|---|
| Material | Platinum metal | Ceramic semiconductor |
| Range | about −200 to 600 °C | about −50 to 150 °C |
| Sensitivity | about 0.4 %/°C | about 3 to 5 %/°C, falling with temperature |
| Linearity | Close to linear | Strongly non linear |
| Standard curve | IEC 60751 | Maker specific (beta or Steinhart Hart) |
| Cost | Higher | Very low |
Choose RTD when
- Process measurement and control
- Wide ranges and interchangeable sensors
Choose NTC Thermistor when
- Equipment and electronics protection
- HVAC and appliances in a narrow range
Key Differences Explained
A thermistor changes resistance so much that simple electronics can read it with good resolution. But each type has its own curve, so replacement must match the maker part.
RTDs follow one international curve, so any Pt100 can replace another of the same class.
Related Glossary Terms
Free Calculators
Frequently Asked Questions
What is the difference between RTD and NTC Thermistor?
Thermistors are cheap and very sensitive over a narrow range; RTDs are standardised, linear and stable over a wide range, so industry uses RTDs.
Are thermistors accurate?
Good ones can be very accurate near their reference temperature, but the range is narrow.
Why is a thermistor non linear?
Its resistance falls exponentially with temperature.
What is a PTC thermistor used for?
Mainly protection, such as motor winding over temperature.
Learn more on the blog
What is an RTD and how it works
A practical guide on instrumentationblog.in that goes deeper into this topic with field examples.
Read Full ArticleMore Comparisons
All comparisons · Instrumentation glossary